Home >  bevel-valve

Related

"Bevel Valve"

Blog
DIN connector
2018-11-12
DIN connector is a connector standard developed by the German standardization society. Since there are too many DIN connector standards, the word DIN connector does not mean any type of connector without attaching a number (e.g., "DIN 43650B connector "). In consumer electronics, the "DIN connector "usually represents a member o... DIN connector is a connector standard developed by the German standardization society. Since there are too many DIN connector standards, the word DIN connector does not mean any type of connector without attaching a number (e.g., "DIN 43650B connector "). In consumer electronics, the "DIN connector "usually represents a member of the circle connector family established by DIN. DIN connectors were originally used to simulate the transmission of audio signals, some of which were later used to simulate video and digital interfaces such as MIDI or IBMPS/2 interface keyboard and mouse cables. The original DIN connector standard has been replaced with the equivalent international standard iec 60130-9.Although the DIN connector and XLR terminal are similar in appearance, they are not compatible. View Details
Dust Cleaner Valve
2018-09-30
1. The dust cleaner valve adopts the brushless high-pressure fan, which can work continuously for up to 1000 hours without maintenance and operate smoothly.2. Stainless steel muffler equipment is installed at the outlet of the motor, so that you can have a quieter working environment. The pressure relief valve is standard, which can balance the pre... 1. The dust cleaner valve adopts the brushless high-pressure fan, which can work continuously for up to 1000 hours without maintenance and operate smoothly.2. Stainless steel muffler equipment is installed at the outlet of the motor, so that you can have a quieter working environment. The pressure relief valve is standard, which can balance the pressure protection vacuum motor in time when the machine is blocked.3. Built-in cyclone separator can effectively isolate most particles and dust to fall to the bottom of the barrel.4. 100L large capacity dust collection barrel, high collection efficiency, separate type of dust collection barrel, convenient and quick dust cleaning, avoiding secondary pollution to the environment.5. The standard 50mm dust absorption caliber can also be customized to different specifications according to the test machine's working conditions, with dual-frequency (50/60hz) and wide voltage design.6. Absorbable: welding slag, grinding and derusting dust, mixture liquid, dust, sand, granules, iron filings, sawdust, cutting fluid. View Details
Steam iron valve maintenance
2018-09-19
1. Regularly clean the dirt on the inside and outside of the high-temperature steam iron valve and the cladding surface, and take care not to damage the sealing surface.2. After the installation of the high-temperature steam iron valve, the medium should be put into the valve several times, and the valve can only be put into formal use after confir... 1. Regularly clean the dirt on the inside and outside of the high-temperature steam iron valve and the cladding surface, and take care not to damage the sealing surface.2. After the installation of the high-temperature steam iron valve, the medium should be put into the valve several times, and the valve can only be put into formal use after confirmation of normal operation.3. If the sealing between piston and seat is not good for a long time, the sealing face of piston can be re-ground and the seat can be re-ground.4. If the high-temperature steam iron valve is not used for a long time, manual valve should be closed before the valve is re-opened. When re-opened, the steam solenoid valve should remove the condensate water and make several test actions.5. When the high-temperature steam iron valve is unloaded from the pipe, wipe the interior and parts and blow the storage with compressed air.6. It is recommended that the user unit send special personnel to be responsible for the use and maintenance.7. When working, pay attention to the pressure gauge before and after the valve. The working pressure shall not exceed the rated pressure. When the working pressure exceeds the rated pressure or the working pressure difference exceeds the rated pressure difference, the solenoid valve should stop using and close the manual valve before and after to avoid the explosion and leakage of the solenoid valve. View Details
Introduction to Bevel valve
2018-08-27
The bevel valve can dissipate energy by the friction between water and air and the vortex in the water after it enters the water. When several bevel valves are arranged in parallel, the distance between the axes should not be too small (for example, not less than 5 times the diameter of the valve shell D), otherwise the flow will collide with each ... The bevel valve can dissipate energy by the friction between water and air and the vortex in the water after it enters the water. When several bevel valves are arranged in parallel, the distance between the axes should not be too small (for example, not less than 5 times the diameter of the valve shell D), otherwise the flow will collide with each other, resulting in a reflected flow. If the flow falls into the valve chamber, it will be difficult to operate. After improving the cone Angle of 50 °, and compared with 90 ° taper Angle valve, can make the distance between valve and valve for D (2.75 ~ 3.0), water tongue area is by two-thirds. View Details
Bevel valve structure
2018-06-06
Bevel valve located in the export of high pressure drain pipe, valve with cylindrical fixed shell, with 4 ~ 6 parallel in the direction of flow of the rib conical head into 90 ° of the cone fixed on the valve shell, with one activity steel valve set set (or inside), on the outside of the cone valve cover with the annular space between the cone is ... Bevel valve located in the export of high pressure drain pipe, valve with cylindrical fixed shell, with 4 ~ 6 parallel in the direction of flow of the rib conical head into 90 ° of the cone fixed on the valve shell, with one activity steel valve set set (or inside), on the outside of the cone valve cover with the annular space between the cone is used to discharge. The flow can be adjusted by using screw drive to move the valve sleeve back and forth along the flow direction. The flow coefficient reached above 0.85 when all opened. Bevel valve structure is simple and easy to operate. Because the weight of the whole valve is borne by the anchor bolt at the root and the valve shell is cantilever protruding, the structural stress condition is unfavorable. View Details
Angle seat valve
2018-03-13
Our angle seat valve is easy to insall ,pneumatic angle seat valve used in a wide variety of applications. The bevel valve structure have big flow rate ,no water hammer,no noise and credible seal perfomance.thread angle seat valve,welded angle seat valve,and flange angle seat valve have ss type,aluminimu type,and plastic type for your choose.... Our angle seat valve is easy to insall ,pneumatic angle seat valve used in a wide variety of applications. The bevel valve structure have big flow rate ,no water hammer,no noise and credible seal perfomance.thread angle seat valve,welded angle seat valve,and flange angle seat valve have ss type,aluminimu type,and plastic type for your choose. View Details
close
certificate
Copyright © 2017 Xingyu Electron (Ning bo) Co., Ltd. All Rights Reserved.
Dsigned and Developed by www.hoogege.com